-
Tenacity Toyota Harrier ACU10 1997-2003 Engine Mount Stay - Tenacity 01-12573
Engine mount stay for the Toyota Harrier ACU10, 1997 to 2003. Tenacity 01-12573, also coded AWSTO1256. Sold as one.New old stock. Never fitted. The box shows its age and the stay does not.This is the torque rod, the part most people call the dog bone. Its job is to stop the engine rocking under load. A Harrier that clunks when you pull away or lift off has usually worn this one out.FitmentToyota Harrier ACU10, 1997 to 2003, as printed on the label. Send us the rego and we will check the chassis code.Fitting Two bolts on most cars, so it is not a long job. Check the main mounts while you are in there. A worn stay usually means tired mounts as well. Torque both bolts to the workshop figure. Best fitted by a qualified mechanic.
$79.00
-
Tenacity Toyota Corolla AE92 1.6 Auto Front Engine Mount - Tenacity 01-12494
Front engine mount for the automatic Corolla AE92. Tenacity 01-12494, also coded AWSTO1025, replacing Toyota 12361-16090. One mount.New old stock. Sealed in its bag and never fitted.FitmentThe label reads Engine mount front Toyota AE92 auto. Tenacity's catalogue lists AWSTO1025 as the front mount for the Corolla 1.6 automatic.Toyota Corolla AE92, 1.6, automatic, 1987 to 1992.Automatic only. The manual Corollas of those years take a different front mount, Toyota 12361-16040. Read the number off yours, or send us the rego.The front mount sits low at the front of the engine. When it goes you get a clunk selecting drive or reverse, and on take off.Fitting Jack under the engine before you undo it. Look over the other mounts while you are down there. Everything to the factory torque with the engine at rest. Best fitted by a qualified mechanic.
$89.00
-
Mackay Toyota Hilux RZN149R 1997-2005 2.7 Engine Mount - Mackay A7596
Mackay engine mount for the Toyota Hilux RZN149R, 1997 to 2005, 2.7 litre 3RZ-FE. Part number A7596. Sold as one mount. New old stock. Never fitted. The bag has been on a shelf a while. The mount has not. Fitment Hilux RZN149R with the 2.7 litre 3RZ-FE petrol engine, 1997 to 2005, SR5 included. The Hilux uses more than one mount and Mackay do not state which position this one fills. Check it against the mount you are replacing, or send us your rego and we will confirm. Fitting Support the engine before you drop the old mount out. Check the other mounts while you are in there. They rarely fail alone. Torque to spec.
$69.00
-
Tenacity Suzuki Swift Wagon R 2001-2007 Front Engine Mount - Tenacity 01-12604
Front engine mount for the Suzuki Swift and Wagon R, 2001 to 2007. Tenacity 01-12604, also coded AWSSU1012.New old stock. Never fitted. The carton has the wear, the mount does not.FitmentSwift and Wagon R, 2001 to 2007, as printed on the label. Makers name mount positions differently. Check this against the one you are replacing, or send the rego to us.Fitting Support the engine, then release the old mount. Look at the others while you are in there. They seldom fail by themselves. Torque up to the Suzuki figure. Best fitted by a qualified mechanic.
$89.00
-
Mackay Mackay Engine Mount, A7595
Mackay engine mount, part number A7595. Sold as one mount. New old stock. Never fitted. The bag has been on a shelf a while. The mount has not. Fitment We have not confirmed which vehicle this mount suits. Mackay publish their applications by part number, so send us your rego or your make, model and year and we will check it for you before you buy. Fitting Support the engine before you drop the old mount out. Check the other mounts while you are in there. They rarely fail alone. Torque to spec.
$69.00
-
Tenacity Nissan March Micra K10 Right Engine Mount - Tenacity 01-11592
Right engine mount for the Nissan K10 March and Micra. Tenacity 01-11592, also coded AWSNI1179. Sold as one.New old stock. Never fitted. The box has been on a shelf a while and the mount has not.New mounts for the K10 are hard to come by. If you run one, it is worth grabbing while it is here.FitmentSuits the Nissan K10 March and Micra, as printed on the label. These mounts are side specific. Compare it with the one you are pulling out, or send us the rego to check.Fitting Take the engine weight before the old one is undone. Everything else on a K10 will be tired too, so check the other mounts. Bolts up to the Nissan torque setting. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Mitsubishi Lancer Outlander Left Engine Mount - Tenacity 01-12603
Left engine mount for the Mitsubishi Lancer and Outlander, up to 2010. Tenacity 01-12603, also coded AWSMI1184.New old stock. Never fitted. The bag has been on a shelf a while and the mount has not. Zinc plated bracket, no surface rust.FitmentLancer and Outlander up to 2010, as printed on the label. Mounts are side specific. Check it against the one you are pulling out, or send the rego and we will confirm.Fitting Take the engine weight before this one drops out. Look over the rest while you are in there. They seldom go one at a time. Bolts to the Mitsubishi torque figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Nissan Pulsar Sentra Left Engine Mount - Tenacity 01-11581
Left engine mount for the Nissan Pulsar and Sentra. Tenacity 01-11581, also coded AWSNI1004. Sold as one.Never fitted. Old stock, with the box carrying the years.FitmentSuits the Nissan Pulsar and Sentra, as printed on the label. No year range is given, and mounts are side specific. Check it against the one you are pulling out, or send the rego over.Fitting Take the engine weight first, then undo the mount. Worth checking the others while you are under there. Torque up to the figure in the manual. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Nissan Fuga Maxima Right Engine Mount - Tenacity 01-11586
Right engine mount for the Nissan Fuga and Maxima. Tenacity 01-11586, also coded AWSNI1015.New old stock. Never fitted. The box has aged and the mount has not.FitmentMounts are side specific. Check this one against what you are pulling out, or send us the rego and we will confirm.Fitting Support the engine before this mount comes down. Check the rest of them while you have access. They rarely go on their own. Torque to the Nissan figure. Best fitted by a qualified mechanic.
$89.00
-
Mackay Nissan 720 Ute 1980-1984 Front Right Engine Mount - Mackay A5178
Mackay front right hand engine mount for the Nissan 720 ute dual cab, 2.2 litre SD22 diesel, 1980 to 1984. Fits 2WD and 4WD, manual and automatic. Part number A5178. Sold as one mount. New old stock. Never fitted. The bag has been on a shelf a while. The mount has not. Fitment Nissan 720 ute dual cab with the 2.2 SD22 diesel, 1980 to 1984, as printed on the label. This is the front right hand side. Check which side you need, or send us your rego and we will confirm. Fitting Support the engine before you drop the old mount out. On a vehicle this age the other mounts will be tired too. Check them while you are in there. Torque to spec.
$69.00
-
Tenacity Range Rover Front Engine Mount - Tenacity 01-12597
Front engine mount for the Range Rover L405. Tenacity 01-12597, also coded AWSLR1001. Sold as one.New old stock. Never fitted. The box is the only part that looks its age.Genuine Land Rover mounts run several hundred dollars. This does the same job for a fraction of that.FitmentThe label reads Land Rover L405, 2009 to 2013. Worth knowing that the L405 Range Rover started production in 2012. If yours is earlier it may be an L322. Send us the rego and we will pin the model down.Fitting Support the engine before the old mount is released. Check the others while you have the weight off. Torque the bolts to the Land Rover figure. Best fitted by a qualified mechanic.
$179.00
-
Tenacity Nissan Primera X-Trail 2000-2007 Left Engine Mount - Tenacity 01-12576
Left engine mount for the 2WD Nissan Primera and X-Trail, 2000 to 2007. Tenacity 01-12576, also coded AWSNI1102. Sold as one.New old stock. Never fitted. The box looks every one of its years. The mount inside is clean.FitmentPrimera and X-Trail 2WD, 2000 to 2007, as printed on the label. This is the left side and the two wheel drive mount, not the 4WD one. Send us the rego and we will confirm the drivetrain.Fitting Support the engine before this one drops out. Look at the rest while the weight is off. They rarely go alone. Bolts to the Nissan torque figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Mitsubishi Mirage Lancer 1987-1992 Rear Mount - Tenacity 01-11426
Rear engine mount for the Mitsubishi Mirage and Lancer, chassis codes C5#A and C6#A. Tenacity 01-11426, also coded AWSMI1079. Sold as one.New old stock. Never fitted. The box shows the age. The mount in it does not.These are the 1987 to 1992 cars, sold here as the Mirage, Lancer and Colt. That takes in the Colt GTi and the Lancer GTi.FitmentChassis codes C5#A and C6#A, as printed on the label. C5 codes are the two door cars and C6 the four door. Read the plate under the bonnet, or send the rego and we will confirm.Fitting Support the engine before you drop the old one out. On a car this age the rest will be tired too. Check them while you are there. Bolts back up to the factory torque. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Mitsubishi Galant E32A Top Engine Mount - Tenacity 01-11391
Top engine mount for the Mitsubishi Galant E32A. Tenacity 01-11391, also coded AWSMI1112. Sold as one.New old stock. Never fitted. The bag has aged and the mount has not.FitmentMitsubishi Galant E32A, as printed on the label. This is the top mount. Check it against the one you are pulling out, or send us the rego and we will confirm.Fitting Support the engine before the old mount comes away. On a car this age the rest will be tired too, so look them over. Bolts up to the factory torque setting. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Land Rover Freelander L314 1.8 Left Engine Mount - Tenacity 01-12481
Left engine mount for the Land Rover Freelander L314 1.8. Tenacity 01-12481, also coded AWSLR1005. Sold as one.New old stock. Never fitted. The box carries the age. The mount inside does not.FitmentFreelander L314 with the 1.8 petrol engine, as printed on the label. This is the left side. Send us the rego and we will check it first.Fitting Support the engine before the old mount drops away. Look over the others while you are in there. They seldom fail alone. Bolts to the Land Rover torque figure. Best fitted by a qualified mechanic.
$129.00
-
Tenacity Nissan X-Trail Rogue Right Engine Mount - Tenacity 01-12482
Right engine mount for the Nissan X-Trail and Rogue. Tenacity 01-12482, also coded AWSNI1326. Sold as one.New old stock. Never fitted. Age shows on the box, not on the mount.FitmentNissan X-Trail and Rogue, as printed on the label. No year range is given and these mounts are side specific. Check it against the one coming off, or send us the rego.Fitting Weight off the engine before you undo anything. Look over the other mounts at the same time. They seldom fail one at a time. Bolts to the factory torque figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Mitsubishi Galant E33A E35A Auto Left Engine Mount - Tenacity 01-11322
Left engine mount for the automatic Mitsubishi Galant E33A and E35A. Tenacity 01-11322, also coded AWSMI1066. Sold as one.New old stock. Never fitted. The box is the only thing showing its age.FitmentGalant E33A and E35A with automatic transmission, as printed on the label. This is the left side, and the manual cars take a different mount. Read the plate under your bonnet, or send us the rego and we will confirm.Fitting Take the engine weight before you undo it. The other mounts on a car this old will be tired as well. Check them. Torque the bolts to the Mitsubishi figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Toyota Yaris 2005-2013 Manual Engine Mount Stay - Tenacity 01-12579
Engine mount stay for the Toyota Yaris, 2005 to 2013. Tenacity 01-12579, also coded AWSTO1238. Sold as one.New old stock. Never fitted. The box shows its age. The stay does not.This is the torque rod, the one most people call the dog bone. It stops the engine rocking under load. A Yaris that clunks when you pull away or lift off has usually worn this out.FitmentToyota Yaris 2005 to 2013, as printed on the label. Send us your rego and we will confirm before you buy.Fitting Two bolts on most Yaris, so it is a short job. Look at the other mounts while you are in there. A worn stay usually comes with tired mounts. Torque both bolts to the Toyota figure. Best fitted by a qualified mechanic.
$79.00
-
Tenacity Honda CR-V Front Engine Mount - Tenacity 01-12463
Front engine mount for the Honda CR-V. Tenacity 01-12463, also coded AWSHO1152. One mount per box.New old stock. Never fitted. The carton shows its age. The mount does not.FitmentHonda CR-V, as printed on the label. No year range or generation is given, and the CR-V has run through a few. Check it against the one you are pulling out. Or send the rego and we will confirm before you buy.Fitting Support the engine before the old mount drops out. Check the others while you are in there. They rarely fail on their own. Torque the bolts to the Honda figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Honda HR-V Engine Mount - Tenacity 01-12465
Engine mount to suit the Honda HR-V. Tenacity 01-12465, also coded AWSHO1166. Sold as one mount.New old stock. Never fitted. The bag shows its age and the mount does not.FitmentHonda HR-V, as the label has it. There is no year range and no position on it. Compare it with the one you are pulling out. Or send the rego through and we will check.Fitting Take the engine weight before the old one comes out. Have a look at the other mounts. They rarely go one at a time. Do the bolts up to the factory figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Mazda Capella 626 GF 1997-2002 Rear Engine Mount - Tenacity 01-11190
Rear engine mount for the Mazda Capella and 626, GF generation, 1997 to 2002. Tenacity 01-11190, also coded AWSMA1055. One mount.New old stock. Never fitted. The box shows its age and the mount does not.Capella is the Japanese name and 626 the export one. Same car, so either badge is fine.FitmentMazda Capella and 626, GF, as printed on the label. This is the rear mount. Hold it against the one you are pulling out. Or send us the rego and we will confirm.Fitting Take the engine weight before the old mount drops out. Check the rest of the mounts while you are in there. They rarely fail alone. Bolts to the Mazda torque figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Honda CR-V RE 2006-2011 Right Hydraulic Mount - Tenacity 01-12569
Right hydraulic engine mount for the Honda CR-V RE 2.0, 2006 to 2011. Tenacity 01-12569, also coded AWSHO1122. One mount.New old stock. Never fitted. The box has aged, the mount has not.This one is hydraulic, marked HYD on the box. It is fluid filled rather than plain rubber. That is what the CR-V RE ran from the factory on this side.FitmentHonda CR-V RE with the 2.0 petrol engine, 2006 to 2011, right side. Send us the rego and we will confirm before you buy.Fitting Support the engine before the old mount comes down. Keep it upright. A hydraulic mount can weep if it is stored or handled on its side. Check the rest of the mounts while you have access. Torque the bolts to the Honda spec with the engine at rest. Best fitted by a qualified mechanic.
$119.00
-
Tenacity Toyota Camry Celica 1985-1993 Left Engine Mount - Tenacity 01-12173
Left engine mount for the manual Toyota Camry and Celica. Tenacity 01-12173, also coded AWSTO1161. Sold as one.New old stock. Never fitted. The box shows the years on the shelf.FitmentLeft side, manual gearbox only. Australian catalogues list the equivalent left mount across the Camry SV21 and the Celica ST162. Both run the 2.0 litre 3S engine. The ST162 ran from 11/1985 to 10/1989 and the SV21 from 05/1987. Send us the rego and we will check yours.Fitting Take the weight off the engine and gearbox first. Look over the rest of the mounts while you are under it. Old rubber next to new rubber tells you what else needs doing. Torque the fixings to the Toyota figure. Best fitted by a qualified mechanic.
$89.00
-
Tenacity Toyota Camry 1987-1993 Manual Rear Engine Mount - Tenacity 01-12200
Rear engine mount for the manual Toyota Camry SV2#. Tenacity 01-12200, also coded AWSTO1068. Sold as one.Never fitted. Old stock, box aged, mount untouched.FitmentRear position, manual gearbox only. SV2# is the V20 Camry. Australian catalogues list this mount for the SV21 and SV22 from 05/1987 to 01/1993. The automatic car takes 01-12199 instead. Send us the rego and we will check which you have.Fitting Hold the engine up before you start on the bolts. Give the rest of the mounts a look while it is apart. Side by side, a tired mount is easy to pick against a new one. Torque everything to the figure in the manual. Best fitted by a qualified mechanic.
$89.00
You have seen 24 out of 124 products