Description
Genuine Bosch GPT-217 glow plug. Bosch part number F 005 X12 993. Made in Japan. Nine in stock.
Read this before you order anything. This is a 14 volt plug for 24 volt superglow systems. Toyota used four different glow plugs across the same engines. Which one you need depends on the electrical system and the glow setup, and they are not interchangeable. Fit the wrong voltage and you will destroy the plug, possibly the harness with it.
-
19850-68010, 10.5 volt, 12 volt manual glow
-
19850-68040, 20.3 volt, 24 volt manual glow
-
19850-68050, 6 volt, 12 volt superglow
-
19850-68060, 14 volt, 24 volt superglow. This one.
The vehicles. Toyota 19850-68060, listed against:
-
Land Cruiser BJ42 from 10/1981, BJ70 from 8/1986, HJ60 from 10/1985
-
Dyna with the B, 2B, 3B, H and 2H engines
-
Coaster bus
-
Hino, as 1985A-68060
-
Daihatsu, same number
Seventy series and sixty series Cruisers are exactly the market for this. Plenty came into New Zealand and the 3B and 2H keep going long after the bodies have given up. Cold starting is usually the first thing to go.
Other numbers. Toyota, Daihatsu and Hino 19850-68060. Denso 067100-1460. NGK Y-197R, older stock number 2188. HKT PT-141. Champion CH104.
Off the box
- Bosch GPT-217
- Bosch part number F 005 X12 993, suffix HAK, reference 657
- Made in Japan, Robert Bosch GmbH, Karlsruhe
- EAC marked. One piece per box
- Barcode 9311831025645
Fitment
Anything calling for 19850-68060 on a 24 volt superglow system. Send the chassis number and we will confirm the glow system before it ships.
Fitting
- Confirm the system voltage first. Everything else is secondary to that.
- Cold engine. These seize into an old head and snap.
- Soak a tight one and leave it. Forcing it means the head comes off.
- Check the glow controller and relay. On a superglow system a failed controller takes the plugs with it.
Best fitted by a qualified mechanic.