Description
Water pump for the older rear drive Mazdas. GMB GWMZ-02A, Mazda 0305-15-010 and 0305-15-010D. Two on the shelf.
This is properly old stock. The cartons have gone soft and dark with age. Open one and the pump inside is untouched, which is the whole point of buying this way.
The printed table
- Bongo UB, BA2N8 and BA2N9, 1500cc, 77 to 83
- Proceed HBPH8 and HBPHE, 2000cc, 81 to 83
- Capella NA, BA2V8H, 1600cc, 78 to 82
- Cosmo VC, BNA61, 1800cc, 71 to 76
- Familia MA, CB2NS and CB2VS, 2000cc, 78 to 82
The year column on this box sits a little high against the model rows, so treat the pairings as a guide and confirm by engine code.
Two label quirks. The warehouse sticker reads FAMILA, missing a letter from Familia. It also names the Luce, which GMB's own table does not. We have left the Luce out of the fitment for that reason.
Also sold as. In the States this is GMB 145-1020, listed for the Mazda 616, 618, 808 and B1600 of the early seventies. It picks up Mazda 0222-15-010C and D, 0315-15-010D and 0459-15-010A, and sells under Gates 43153, NAPA N451020 and Airtex AW9300.
Fitment
Mazda Bongo, Proceed, Capella, Cosmo and Familia as tabled, plus the 616, 618, 808 and B1600 by cross reference. Rego or old part number, either works, and we will check.
Fitting
- Cars this age often have a rusty system. Flush it out properly while the pump is off.
- Look hard at the fan belt and the bottom hose before you put it all back.
- Clean the face, new gasket, and no shortcuts on an engine this old.
- Fill it, warm it through, then chase down any weep straight away.
- Best fitted by a qualified mechanic.